GE JDP47 Installation Instructions Manual page 9

Installation Instructions
I51Standard Installation Instructions
Installing the Anti-Tip Bracket
The anti-tip bracket is attached to
the back of the Drop-In Range. It is
designed to fit under the bottom of the
countertop opening at the rear. Measure
counter thickness at back of cutout to
determine correct bracket location.
ANTI-TIP INSTALLATION
Select the proper position for the countertop
thickness and move bracket to proper position.
(Unit is supplied with bracket in position 1 .)
(_ For 3/4" Counter
(_) For 1.18" (3 cm) Counter
(_ For 1.5" Counter
(_) For 3.5"
(_) Alternate
(shown below)
Glass Cooktop ----I
Anti-Tip Bracket Location
(Rear of Range)
Interior Wall -_
114" Min. Flat Area
Glass
Maintop
\
Bottom of
Countertop
to Engage
Bracket by
1/2" Min.
..,--Wall Stud
Countertop
i Thickness
Bottom of
- Countertop
Wire Cover
_ Y
ALTERNATE
ANTI-TIP INSTALLATION
Interior Wall_
Non-Kit ApI:
Glass Maintop \
_ _Wall Stud
Countertop
Surface
10-3/8"
Non-Kit
Application
Anti-Ti I
*Attach ment
To Engage
Bracket By 1/2" Min.
_ ttachment Anchored
To Wall Stud
Is Required
9 (Continued on following page)