GE JDP47 Installation Instructions Manual page 12

Installation Instructions
151 Standard Installation Instructions cont
Replacing the Oven Door
NOTE: The oven door is heavy. You
may need help lifting the door high
enough to slide it into the hinge slots.
Do not lift the door by the handle.
Lift the oven door by
placing one hand on
each side. The door is
heavy, so you may need
help. Do not lift the door
by the handle.
With the door at the same angle as
the removal position (halfway between
the closed and broil stop position,
seat the notch of the hinge arm into
the bottom edge of the hinge slot.
The notch of the hinge arm must be
fully seated into the bottom of the slot.
Bottom Edge_
of Slot
Hinge Arm
/
/////
Hinge Notch
I_ Open the oven door as far as it
will open.
I"_ Push the hinge locks up against the
front frame of the oven cavity, to the
locked position.
Hinge in
Locked Position
Notch of Hinge
Securely Fitted
into Bottom
Hinge Slot
I"_ Close the oven door.
I-_ Check for Proper Installation
of Anti-Tip Bracket
Lower the oven door and gently apply
medium force at the handle end until
movement of the range is detected.
Continue pressing until the anti-tip
bracket is engaged and movement
stops. A small amount of movement is
acceptable at the back of the range
top, but it should be stable and not tip
once the anti-tip bracket is engaged.
12