GE JDP47 Installation Instructions Manual page 7

Installation Instructions
Electrical Connections cont
THREE-CONDUCTOR BRANCH
CIRCUIT CONNECTION
When connecting to a 3-conductor branch
circuit, if local codes permit:
Connect the bare oven ground
conductor with the crimped neutral
(white) lead to the branch circuit
neutral (white or gray in color),
using wire nuts.
Connect the oven red lead to the
branch circuit red lead, and the oven
black lead to the branch circuit black
lead in accordance with local codes,
using wire nuts. If the residence red,
black or white leads are aluminum
conductors, see "WARNING" note
(See page 6).
Black
Range Conduit
Branch
Circuit
Red
Ground and
Neutral Wires
(White)
Knockout
Neutral Bare Wire
Connection
NEW CONSTRUCTION AND
FOUR-CONDUCTOR BRANCH
CIRCUIT CONNECTION
• When installing in new construction, or
• When installing oven in a mobile home or
recreational vehicle, or
• When local codes do not permit grounding
through neutral:
Cut the neutral (white) lead from the
crimp. Re-strip the neutral (white)
lead to expose the proper length of
conductor and connect it to the white
or gray branch circuit neutral in
accordance with local code using
wire nuts.
Attach the appliance grounding lead
(green or bare copper) in accordance
with local codes. If the residence
grounding conductor is aluminum,
see WARNING note (See page 6).
Connect the oven red lead to the
branch circuit red lead and the oven
black lead to the branch circuit black
lead in accordance with local codes,
using wire nuts. If the residence red,
black or white leads are aluminum
conductors, see "WARNING" note
(See page 6).
Range Conduit
Snaps Into
Black
/
Branch
Circuit
Ground
/
Red
=Alternate
Knockout
White
7 (Continued on following page)