Rebooting The Switch; Pinging Hosts - Cisco SG200 Series Administration Manual

Administration

Rebooting the Switch

Rebooting the Switch
STEP 1
STEP 2
STEP 3

Pinging Hosts

STEP 1
STEP 2
Cisco Small Business SG200 Series 8-port Smart Switch
Use the Reboot page reboot the switch. To reboot the switch:
Click Administration > Reboot in the navigation window.
Select one of the following options:
• Reboot—Reboots the switch using the latest save configuration.
• Reboot to Factory Default—Reboots the switch using with the factory
default configuration file. Any customized settings are lost.
A window appears to enable you to confirm or cancel the reboot. The current
management session might be terminated.
Confirm or cancel the reboot.
Use the Ping page to send a Ping request from the switch to a specified IP
address. You can use this feature to check whether the switch can communicate
with a particular network host.
To ping a network host:
Click Administration > Ping in the navigation window.
Select IPv4 or IPv6 as the Address Type.
3
74