Knobs; Packaging Tape; Stainless Steel Surfaces; Vent - GE JDP47 Owner's Manual

Care and cleaning of the range. ,, O lia,cesoom
Be sure all controls are off and all surfaces are cool before cleaning any part of the range.
ff your range is removed for cleaning, servicing or any reason, be sure the anti-tip
device is reengaged properly when the range is replaced. Failure to take this
precaution could result in tipping of the range and cause inju_
Howto Remove Packaging Tape
To assure no damage is done to tile finish
of the product, the safest way to remove
adhesive left from packaging tape and
labels on new appliances is an application
of a household liquid dishwashing
detergent, mineral oil or cooking oil.
Apply with a soft doth and Nlow to .soak.
Wipe dry and then apply an appliance
polish to thoroughly clean and protect
tile suri;ace.
NOTE:Theadhesive mustberemoved fromall
parts.It cannot h eremoved if it is baked on.
Control Knobs
Thecontrol knobsmay be removedfor easier
cleaning
Before removing tile knobs for
cleaning, please note that tile knobs
are in the 0FFposition. When replacing
the knobs, check tile OFFposition to
insure proper placement.
Wash the knobs in soap and water or
a vinegar and hot water solution but
do not soak.
Oven Vent
Theovenventis located abovetheleft sideof
thedoor.
This area could become hot during
oven use.
It is normal for steam to come out of"
tile vent.
Theventis important f orproper air circulation.
Neverblockthis vent.
Stainless Steel Surfaces tonsome models)
Do not use a steel wool pad; it will
scratch thesurface.
To clean tile stainless steel surface,
use warm sudsy warm; a stainless steel
cleaner such as Kleen King _ or an
all-purpose liquid or spray cleanen
Always scrub in tile direction of tile
grain. Rinse thoroughly with a sponge or
cloth and clean water. Dry with a soft,
clean cloth.
After cleaning, use a stainless steel
polish, such as Stainless Steel Magic _,
Revere Copper and Stainless Steel
CleaneW or Wenol All Purpose
Metal Polish_ Follow the product
instructions for cleaning the stainless
steel surface.
21