GE JDP47 Owner's Manual page 29

ww_. GEAppliances.com
Possible Causes What To Do
The oven temperature is • Allow tile oven to cool and reset tile controls.
too high to set a self-clean
operation.
Oven controls improperly set. • See the Using the self-cleaning oven section.
This is the sound of the • This is normal.
metal heating and cooling
during both the cooking and
cleaning functions.
Excessive soil. • Press the CLEAR/OEFpad. Open the windows to
rid the room of smoke. Wait until the LOCKED light
goes off. Wipe tip the excess soil and reset the clean
cycle.
Oven too hot. • Allow the oven to cool below locking temperature.
Oven controls not properly set. •SeetheUsingtheself-cleaningovensection.
Oven was heavily soiled. • Clean up heavy spillovers before starting tile clean
cycle. Heavily soiled ovens may need to sell:clean
again or for a longer period of time.
The self-clean cycle has been • Close the oven door.
selected but the door is not
close
The oven door is locked • Press the CLEAR/OFFpad. Allow the oven to cool.
because the temperature
inside the oven has not
dropped below the
locking temperature.
You have a function • Press the CLEAR/OFFpad. Put the oven back into
error code. operation.
If the function code repeats. • Disconnect all power to the range for at least 30
seconds and then reconnect powen If the timction
error code repeats, call for service.
29