GE EER3000 Owner's Manual page 27

Cleaningthe glass cooktop, ge.com
Clean your cooktop after
each spill. Use CERAMA
BRYTE® Ceramic Ceoktep
Cleaner.
Normal Daily Use Cleaning
ONLY use CEIL_d_<IABRYTE _'Ceranfic
Cooktop (;leaner on tile glass cooktop.
Other creams ma_ not be as eflectixe.
To maintain and protect tile sm'ti_ce of
yore" glass cooktop, fi)llow these steps:
[] Before using the cooktop for the
fi_t time, clean it with CE]L_dMA
BRYTE <'_ C eramic Cooktop Cleaner
This helps promct the top and
makes cleanup easier:
[] Dail) rise of CEIL_d_IA BRYTE (_'
Ceramic Cooktop Cleaner will help
kee I) tile cooktop looking new.
[] Shake tile cleaning cream well.
Appl) a few drops of CEIL_dMA
BRYTE ': Ceramic Cooktop Cleaner
directly to the cooktop.
[] Use a paper towel or CEIL_d_<IA
BRYTE _> Cleaning Pad for Ceramic
Cooktops to clean the entire
cooktop S/lI]il ce.
[] Use a dry cloth or paper towel
to remove all cleaning residue.
No need to rinse.
NOTE: It is very important that you DO NOT
heat the cooktop unfii it has been cieaned
thoroughl_
ii i I i_i i _i_ _i_ii _ _ii)iii( _i_
Usea CERAMA BRYTE *_Cleaning
Pad for Ceramic Co&tops.
Burned-On Residue
WARNING:DAMAGE to yourg/asssurface
may occurif you usescrubpadsother than
thoserecommended.
[] Allow tile cooktop to cool.
[] Spread a few drops of CEI_AAMA
BRYTE _> Ceramic Cooktop Cleaner
on tile entire bm'ned residue area.
[]
Using tile included CEIL_dMA
BRYTE _:' Cleaning Pad for Ceramic
Cooktops, _ub tile residue area,
ali))lxing, , pressm'e as needed.
[]
[]
If any residue remains, repeat tile
steps listed above as needed.
For additional protection, alter
all residue has been remoxed,
polish the entire surfilce with
CEIL_d'dA BRYTE ': Ceramic
Cooktop Cleaner and a paper towel.
The CERAMA BRYTE '*_Ceramic
Co&top Scraper and all
recommended supplies are
available through our Parts Center.
See flTstructions under "To Order
Parts" section on next page.
NOTE:Do not use a dull or
nicked blade.
Heavy, Burned-On Residue
[] Allow tile cooktop to cool.
[] Use a single-edge razor blade
scraper at approximately a 45 °
angle against the glass surtace
and scrape the soil. It will be
necessary to apply pressure to
tile
I'_lZOI" scraper ii1 order to
remove tile residue.
[]
After scraping with tile razor
scrape_; spread a fi_w drops of
CEIL_d'dA BRYTE ': Ceramic
Cooktop Cleaner on the entire
burned residue area. Use tile
CEIL_dMA BRYTE ': Cleaning Pad to
remove any remaining residue.
[]
For additional protection,
after all residue has been
removed, polish the entire
surtace with CEI_dMA BRYTE ')
Ceramic Cooktop Cleaner
and a paper towel.
27