Back to Contents Page
Palm Rest
Dell™ Inspiron™ 300m Service Manual
Removing the Palm Rest
Replacing the Palm Rest
Removing the Palm Rest
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the Owner's Manual.
NOTICE:
Disconnect the computer and any attached devices from electrical outlets.
NOTICE:
To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.
NOTICE:
Read
"Before You
Begin" before performing the following procedure.
1. Remove the battery.
2. Remove the keyboard.
3. Turn the computer over, and remove the three M2 x 4-mm screws from the bottom of the computer.
1
M2X4 screw (3)
4. Turn the computer over, and open the display.
5. Remove the six M2 x 4-mm screws on the palm rest.