Programming The Memory Feature - Jeep 2012 Liberty Owner's Manual

152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
recall either of the two pre-programmed memory profiles
by pressing the appropriate side of the switch.
Driver Memory Switch

Programming The Memory Feature

To create a new memory profile, perform the following:
NOTE: Saving a new memory profile will erase an
existing profile from memory.
1. Turn the ignition ON.
2. Adjust all memory profile settings to desired prefer-
ences (i.e., seat, side mirror and radio station presets).
3. Press and release the SET button on the memory
switch, then press the side of the rocker switch labeled (1)
within five seconds. The Electronic Vehicle Information
Center (EVIC), if equipped, will display which memory
position is being set.
If desired, a second memory profile can be stored into
memory as follows:
1. Turn the ignition ON.
2. Adjust all memory profile settings to desired prefer-
ences (i.e., seat, side mirror and radio station presets).