Table of Contents
Advertisement
Installation Preparation
REMOVE PACKAGING FROM CART MODELS
1. Cut the banding. Use o box cutter or utilitg knife to
score and cut the carton along the base (or remove
the staples with a staple remover or a screwdriver).
2. Lift the carton straight
up and off of the grill.
t
jCut
the banding
with tin snips.
L
Score and cut.
6. Open the lid. Cut plastic ties and bands.
3. Remove all outside packing materials.
Parts
Package
Grill Grates
Parts
Package
4. Remove the parts packages on each side at the bottom.
5. Remove the screws from the hold-down
board on the
right side of the skid to allow the appliance
dollLI to
slip under the wheels.
NOTE: When using an
appliance
dollLI, the
grill must be handled
and removed from the
right side. The right-
side wheels do not
rotate.
7. The right-side
shelf must be removed when using
an appliance
dollLI to lift the grill off the skid.
A. On the right side of the grill, remove the screw
from the back side of the shelf.
H01d-D0wn
Board
Holding Pin
B. Slide the shelf out of the holding pin at the front
end of the bracket.
(;;S
(2;2;-2
13
Advertisement
Table of Contents
