Table of Contents
Advertisement
• This cooking center is designed for outdoor
Choosing
the Location
• Ensure that fresh air ventilation is adequate.
• Consider exposure to wind and proximity to
• The minimum clearances to combustibles
• Phillips head screwdriver
Tools &
• Pipe wrench
Materials
• Level
• Flat blade screwdriver (3/32" blade)
Required
• Pliers
(Not supplied)
• Open the box and remove packaging.
Step 1
• Open the grill lid and remove hardware
Remove the
Packaging
Step 2
Provide
Support
Installation
On a Cart
4
use only. Do not locate the grill in a
building, garage or other enclosed area.
traffic paths.
must be maintained at all times.
accessory carton. Check contents.
Motor
Spit Forks
Rotisserie Rod and Handle
The Outdoor Cooking Center can be installed
on a ZX24CTBSS cart which is designed
specifically for this model. Follow the installa-
tion instructions provided with the cart to
install. Proceed to Gas supply, Step 3, to
complete the installation.
Design Information
24" Outdoor Cooking Center
• Do not install a grill below overhead
unprotected combustible construction.
• The installation must conform to local codes
or in the absence of local codes, with the
national fuel gas code, ANSI Z223 latest
edition.
CAUTION
is extremely heavy. 2 people are required
for lifting and placing the product onto a
cart or into an enclosure.
PRUDENCE
est extrêmement lourd. Il faut deux
personnes pour le soulever et le mettre sur
un chariot ou dans une enceinte.
2 Ceramic Briquette Trays
LP Regulator
• Allow at least 12" clearance at the back of the
grill when exhaust is directed to a window or
a surface that is difficult to clean.
This Cooking Center
Ce centre de cuisson
2 Grill Grates
Type 1 Acme,
20 Lb. LP Tank with Overfill
Protection Device. (not supplied)
Order ZXLPY
Required for Grill Cart Installation
Advertisement
Table of Contents
