Pioneer DEH-8018ZT Owner's Manual page 9

• SSP (Scion Sound Processing)
SSP is a modified DSP (Digital Signal
Processing) system that provides a
customized sound for your vehicle.
Press the MULTI KNOB to display
the current SSP mode setting.
While the setting is displayed, press
repeatedly to switch to the following
modes.
NATURAL: Natural and smooth sound
that gives no listening
fatigue but comfort.
HEAR: A powerful, energetic, live
sound.
Player's sound –> reproduc-
FEEL:
es the sound on the stage
that musicians hear.
For more details, please visit the SCION
Web site at
http://www.scion.com/.
Each time you press it, the SSP changes
in the following order:
NATURAL  HEAR  FEEL
• AUDIO CTRL
When the MULTI KNOB is turned,
the setting item of the AUDIO CTRL
menu will switch in the following
order:
FADER  BALANCE  BASS  TREBLE 
ASL (Automatic Sound Levelizer)  SUB-W
(Subwoofer)  ASR (Sound Retriever)
FADER: Turn the MULTI KNOB to adjust the
sound balance between the rear and
front speakers.
The display ranges from R7 to F7.
BALANCE:
Turn the MULTI KNOB to adjust the
sound balance between the left and
right speakers. The display ranges
from L7 to R7.
BASS: Turn the MULTI KNOB to adjust low-
pitched tones. The display ranges from
–5 to 5.
TREBLE:
Turn the MULTI KNOB to adjust high-
pitched tones. The display ranges from
–5 to 5.
ASL: During driving, noise in the car changes
according to the driving speed. The
Automatic Sound Levelizer (ASL)
automatically adjusts the volume based
on driving speed. If this noise becomes
greater, the sensitivity (variation of
volume level to noise level) of ASL can
be set to one of three levels. Press the
MULTI KNOB changes the ASL setting
as follows:
LOW  MID  HIGH  OFF
SUB-W:
Subwoofer output phase can be
switched between normal and reverse
by pressing the MULTI KNOB, Turn
the MULTI KNOB up or down to adjust
the output level of the subwoofer.
Each time MULTI KNOB is turned up
or down, subwoofer level increases or
decreases. (+6 to –24 is displayed as
the level is increased or decreased.)
• The output level and output phase
of the subwoofer can be adjusted
only when "SUB-W CTRL" on the
SETUP MENU is set to ON. While
"SUB-W CTRL" is set to OFF, the
output level and output phase cannot
be adjusted. (Refer to page 52.)
ASR: The ASR (Sound Retriever) function
provides a wide, deep and rich quality
to MP3/WMA/AAC sound, which gives
the user a lively impression. Pressing the
MULTI KNOB repeatedly switches the
setting in the following order:
LOW RATE  HIGH RATE  OFF
LOW RATE:
Effective for low-compres-
sion audio media.
HIGH RATE:
Effective for high-compres-
sion audio media.
<CRB3644-B/U>9
9