Pioneer DEH-8018ZT Owner's Manual page 61

When problems occur while the iPod is connected to this unit, a message will appear on the display. Refer to the
table below to identify the problem, then take the suggested corrective action.
ERROR 3
ERROR 4
ERROR 6
CONNECTION ERROR
NO SONGS
EMPTY
STOP
IPOD ERROR
UPDATE
There is probably an electrical or mechanical fault in the iPod.
Please check the iPod.
This appears when there is excess current flow.
Contact your Scion dealer and ask for repair.
This appears when an iPod software version is unusual and not supported by this unit.
Please check the iPod software version.
Communication failure.
Disconnect the cable from the iPod. Once the iPod main menu appears in the iPod
display, connect the cable again.
No songs.
Transfer the songs to the iPod.
There are no songs in the selected list.
Select a list that contains songs.
iPod has stopped.
Select again from list or connect the iPod again.
If the iPod freezes, reset and connect again.
This appears when an unsupported iPod is connected.
Disconnect the device.
This appears when the iPod is unusual and not compatible with this unit.
Please check the iPod compatibility.
<CRB3644-B/U>61
61