Pioneer DEH-8018ZT Owner's Manual page 51

Editing the Text
The SETUP menu will be
displayed when MULTI KNOB is
held down while the power is in
" "
OFF position. Turn the MULTI
KNOB to select the OPENING.
You can enter the character at
the flashing cursor position. The
character selection method is
described below.
1 Enter the character to PRESET1, 2
and 3. Turn the MULTI KNOB right
or left to select the character, and
press the RIGHT or LEFT to move
the cursor.
•
PRESET1: Alphabet input (A-Z)
•
PRESET2: Number
•
PRESET3: Space, Deletion
2 After selecting the character,
press the MULTI KNOB right. The
cursor moves to the right, so you
can edit the next character.
(Maximum number of characters
for entry is 12.)
To choose and delete the
character or text, choose the
character with the cursor and then
press PRESET3 to delete.
3 After character entry, press the
MULTI KNOB to register the text
string.
If the cursor is positioned on the
12th character, press the RIGHT
to register the whole text entered.
New Message Display
The next time the ACC is
switched on, the text edited by
the user will be displayed.
NOTICE
To avoid draining the battery,
do not leave the car audio on
longer than necessary when
the engine is not running.
<CRB3644-B/U>51
51