Garmin NavTalk Owner's Manual page 99

From the Active Route Page you can change the
name of the active route, review information on a route
waypoint or bypass route waypoints and GOTO any
waypoint in the route (see page 82) .
The user-selectable data field on the right side of the
page also keeps you informed of current conditions.
There are ten different data items available. Use the
The following options are available:
Show Map - allows you to view the area around
the active route. When selected, 'Show Map' will show
the map display centered around the first waypoint in
the active route.
Setup Plan - displays a trip planning screen, allow-
ing you to plan and review distance, fuel, time en route
and sunrise/sunset information for the selected route.
To use the trip planning features:
Re-evaluate - reactivates the current route and
selects the route leg closest to your current position as
the active leg. The active leg defines the current 'from'
and 'to' waypoints.
Deactivate - cancels navigation of the route you are
currently using.
Invert - reactivates the current route in reverse
order and navigates from the end waypoint back to the
beginning waypoint. See page 84.
Insert Wpt - allows you to insert an additional
waypoint into the route, directly in front of the current-
ly highlighted waypoint in the route. If no route way-
point is highlighted, this option is not available.
See page 84 for route editing info.
keys for data type descriptions.
SECTION 6