Garmin NavTalk Owner's Manual page 59

Access the Setup Program through the Main
Menu using the Menu button and the
Pad to scroll down to Menu Setup. Press
access the directories of the Setup program. Directories
are selected by tabs at the top of the screen. Use the
Rocker
There are several methods for moving from
field to field and making entries in each directory:
Start with the first directory titled, "Phone."
There are three Answer Mode options,
Manual Answer, Auto Answer (Hands-Free, for
headsets), and Auto Pager. When Auto Pager
answers, the microphone is muted and the unit
emits a beep tone to indicate the Auto Pager fea-
ture is active. The caller then enters their phone
number which is placed in the "Missed Calls" list
along with a date/time stamp. Inform frequent
callers about the Auto Pager beep tone signal.
Pressing pre-empts Auto Pager. Pressing
before answering any call, cancels Auto
Answer or Auto Pager. These two modes then
resume for subsequent calls. Auto Redial allows
you to redial the number you are calling up to
nine times. Auto Data provides for location data
transmission without ringing the phone or requir-
ing the key to be pressed, and without dis-
playing messages about location transfer. If data is
not detected within three seconds, the call will
ring for up to 50 seconds and is treated according
to user selection (Auto Answer, Auto Pager, or
Manual Answer). Auto Data selection can be
locked and unlocked using the Security Password.
Arrows to scroll from tab to tab.
Rocker
to
2. Pop - Up Menus
The three types
of fields used for
programming
the NavTalk:
1. Data Entry
3. Buttons