Garmin NavTalk Owner's Manual page 63

You can store up to three cellular numbers in the
NavTalk. This page displays your Active NAM, The
Phone Number for that NAM, the Home System
Number, Side A or B and ESN Number. The
Programming Call Blocking
NavTalk can be programmed with up to three
phone numbers. To select the phone number that is
appropriate for the area you are in, highlight the
Active NAM field, press and then select
NAM #1, #2, or #3. This page also displays the
Active NAM phone number, Home System and
ESN No. You can use the NAM page to select which
phone number that is appropriate for the area you
are in. NAM programming must be done by your
cellular service provider when you contract for service.
Secured NAM selection. Enter
Security Password to unlock
and change to NAM #2 or
The scanning feature allows to access cellular ser-
#3.
vice in the order and selection made on this page.
Select Home to scan for your Home system first.
You can enter SID' s to the Preferred SID list and
scan for those numbers next If you select A then B,
the phone will scan for a Side A system first then for
a Side B system. You can choose any combination of
A/B Side scanning. The Preferred SID List holds the
SID' s that you have selected which will be scanned
when you check the Preferred List box. The Status
Bar at the base of the display indicates which type of
service is active. Home = H, Preferred SID' s = P , Side
Secured Scanning Page
A Systems = A and Side B Systems =B.
Information is Programmable
to meet your Roaming
Requirements.
Emergency calling will override scan settings and
use any available system.