Electronic Oven Controls; Display; Clock; Timer - Kenmore Gas double oven range Use And Care Manual

Use thefollowing c hart a saguide forcookware material
characteristics.
COOKWARE CHARACTERISTICS
Aluminum • Heats quickly and evenly.
Cast iron
Ceramic or
Ceramic glass
• Suitable for all types of cooking.
• Medium or heavy thickness is best for
most cooking tasks.
• Heats slowly and evenly.
• Good for browning and frying.
• Maintains heat for slow cooking.
• Follow manufacturer's instructions.
• Heats slowly, but unevenly.
• Ideal results on low to medium heat
settings.
COOKWARE CHARACTERISTICS
Copper • Heats very quickly and evenly.
Earthenware • Follow manufacturer's instructions.
• Use on low heat settings.
Porcelain • See stainless steel or cast iron.
enamel-on-
steel or cast
iron
Stainless steel • Heats quickly, but unevenly.
• A core or base of aluminum or copper
on stainless steel provides even
heating.
ELECTRONIC OVEN CONTROLS
A B C D E
UPPEROVEN 1 2 3
@ ®@
Clock Cook& Delay
Hold
K d
4 5 6
8 9
Favorite 0 Autoset
H G F
A. Upper oven settings
B. Oven display
C. Upper oven light
D. Upper oven stop
E. Number pads
F. Autoset
G. Favorite setting
H. Lower oven stop
L Lower oven light
J. Delay
K. Cook & Hold
L. Clock
M. Timer 2
N. Timer 1
O. Lower oven settings
When power is supplied to the range or after a power
interruption, the last clock time before power was interrupted will
flash. See "Clock" section to set time of day.
Bake or Lock may flash rapidly in the display to alert you if there
is an error or problem. Press STOP and reset clock if needed.
When the oven is in use, the display shows the temperature and
oven setting.
When the oven is not in use, the display shows the time of day.
The clock can be set to display time in a 12-hour or 24-hour
format. The clock is set at the factory for the 12-hour format.
To change the clock to 24-hour format:
1. Press and hold the upper oven STOP pad and FAVORITE pad
for 3 seconds. "12 Hr" will flash in the display.
2. Press AUTOSET to select "24 Hr"; press again to select
"12 Hr."
3. Set the time of day by following the "To Set" instructions.
The Cancel pad stops any function except the Clock, Timer,
Control Lock.