Viking 970 Use And Care Manual page 10

Hide thumbs Also See for Viking 970:
Table of Contents

Advertisement

}
o
o
..12}
olI
-1]i
o®o
(_N_FF
X_UR£
J
/
/
Note: The line of day must first be set in order to operate the ovenl
To Set the Clock
When the range is first plugged in, or when the power supply to the range has been interrupted, the display will flash "12:00".
1.
Press CLOCK.
2.
Within 5 seconds, press and hold the _
or _
until the correct time of day appears in the display.
Note: The clock cannot be changed during any timed bake or self-clean cycle.
To Set the Minute
Timer
1.
Press TIMER
ON/OFF.
2.
Press the _
to increase the time in one minute increments. Press and hold the ,_
to increase the time in 10 minute
increments. The timer can be set for any amount of time from 1 minute to 11 hours and 59 minutes.
Note: If you press the '_
first, the timer will advance to 11 hours and 59 minutes.
3.
Thedisp_aysh_wsthetimerc_untd_wninminutesunti__neminuteremains.Thenthedisp_aywi__c_untd_wninsec_nds.
4.
When the settimehasrun
out, the timerwill beep 3times. It will then continueto beep 3times every 60 seconds until TIMER
ON/OFF is pressed.
Note: The minute timer does not start or stop cooking. It serves as an extra timer in the kitchen that will beep when the set time
has run out. The minute timer can be used alone or du ring any of the other oven functions. When the minute timer is in use with
any other function, the minute timer will be shown in the display. To view other functions, press the pad for that function.
To Change the Minute Timer while it is in use:
While the timer is active and shows in the display, press and hold the _
or V
to increase or decrease the time.
To Cancel the Minute Timer before the set time has run out: Press TIMER ON/OFF.
10

Advertisement

Table of Contents
loading

This manual is also suitable for:

970 series

Table of Contents