Cleaning The Humidifier - Kenmore 2.0 & 3.5 gallon warm mist humidifier 997.151230 Owner's Manual

Attach a new or cleaned absorption sleeve to the heating
element. Pull sleeve tightly around the heating element and
secure it with the attached Velcro ® fastener. See illustrations
below.
NOTE: It is important to be sure the sleeve is very tight
around the heating element for best performance.
_iiili
!iii
i!i_i
iiil
_AA&AA_
Wrong Wrong Correct
• Replacement Sleeve Item No. 15005.
Absorption Sleeve 3-Pack Item No. 15110 can be found at
your local Sears store.
CLEANING THE ABSORPTION SLEEVE
Hand wash the absorption sleeve using running tap water,
while gently rubbing the inside and outside of sleeve with your
fingers. Do not put absorption sleeve in washer or dishwasher.
• Inspect the absorption sleeve for signs of wear. Do not use
if sleeve is torn, tattered, or has holes.
NOTE: Washed absorption sleeves may build up minerals more
quickly and may experience deterioration of the sleeve material.
Washed absorption sleeves will need more frequent cleaning.
page 9
CLEANING THE HUMIDIFIER
It is strongly recommended that you clean your humidifier at
least once a week, or more frequently if you:
• Have hard water.
• Notice a buildup of impurities.
• Notice an unpleasant odor.
Always turn off and unplug the humidifier before cleaning.
Be sure to wait until the heating element has cooled
sufficiently.