Garmin GPSMAP GPSMAP 196 Pilot's Manual & Reference page 44

Main Pages
Active Route Page Options
Choosing 'Select Approach' will display a list of published
approaches for the fi nal destination airport.
Once an approach is selected, a second pop-up window will ask
if you want vectors-to-fi nal. This creates an extension of the fi nal
course segment.
34
• Select Approach— allows you to select the fi nal course segment of a published approach, replacing
the fi nal destination airport (in a GOTO or route) with the sequence of waypoints for the selected
approach. The approaches provide only the fi nal course segment, usually from fi nal approach fi x
(FAF) to missed approach point (MAP), and are based on existing GPS, RNAV, VOR, NDB, localizer or
ILS approach procedures. Regardless of what type of approach it' s based upon, the procedure is fl own
as a sequence of waypoints in the route. In order to select an approach and add the waypoints to the
route, the fi nal destination in the 'Goto' or route must be an airport with a published approach.
To add an approach for the destination airport to the active route:
1. Create and activate a 'Goto' or route which ends at an airport with a published approach.
2. With the Active Route Page displayed, press MENU to display the Active Route Page Options.
3. Use the ARROW KEYPAD to highlight 'Select Approach' and press ENTER. A pop-up window will
appear listing the available approaches for the destination airport.
4. Use the ARROW KEYPAD to select the desired approach and press ENTER. A second pop-up
window will appear, asking if you want to activate 'Vectors?' (i.e., vectors-to-fi nal; see the 'Vectors'
option on the following page).
5. Use the ARROW KEYPAD to select the on-screen 'Yes' or 'No' button, as desired, and press ENTER.
)
In some situations you may wish to load the approach while still some distance away,
enroute to the destination airport. Select 'No' in step 5 above and you can later select
'Vectors' (described on the following page) to activate the fi nal approach course.
• Remove Approach— removes the approach waypoints from a 'Goto' or route, replacing them with
the corresponding airport waypoint (which is normally the center of the airfi eld).
To remove an approach from the active route, replacing it with the corresponding
airport waypoint:
1. With the Active Route Page displayed, press MENU to display the Active Route Page Options.
2. Use the ARROW KEYPAD to highlight 'Remove Approach' and press ENTER.