Appendix E: Messages - Garmin GPSMAP GPSMAP 196 Pilot's Manual & Reference

Garmin gpsmap 196 pilot's guide
Hide thumbs Also See for GPSMAP GPSMAP 196:
Table of Contents

Advertisement

Accuracy Alarm — Accuracy has degraded beyond user-defi ned limits set on the Alarm screen.
Alarm Clock — The alarm time defi ned on the Alarm screen has been reached.
Appendix E
Approaching Target Altitude — The current altitude is within 1000 feet of the fi nal VNAV target altitude.
Approaching Turn — Displayed when you are nearing a turn in a route.
Messages
Approaching VNAV Profi le — You are within one minute of reaching the initial VNAV descent point.
Arriving at Destination — Displayed when you are nearing your destination.
Basemap Failed — Internal hardware error. Contact your dealer or Garmin Customer Service for assistance.
Batteries Low — when displayed you have less than 10 minutes of battery life left.
Cannot display all found, use city or postal code — The unit found too many items to display. Narrow the
search using the city or postal code.
Can't Unlock Maps — No applicable unlock code for one or more maps was found. The affected MapSource
maps are not accessible.
Database Error — Internal hardware error. Contact your dealer or Garmin Customer Service for assistance.
Detail Maps Don't Support Routing — The MapSource maps currently in use do not include routable road data.
Fuel Tank Timer — The time interval set on the Timer screen has expired.
Inside SUA — Your aircraft has entered the boundaries of a special use or controlled airspace.
Lost Satellite Reception — The unit is unable to continue receiving satellite signals.
Memory Full — Unit memory is full, no further data can be saved.
Near Proximity Point — You have reached the distance set for a proximity waypoint.
No Diff GPS Location — RTCM is selected but the unit is not receiving DGPS data.
None Found — No data matched the search criteria.
No Tide Stations for that Area — No tide stations within 100 miles of the area.
Off Course — You are off course the distance set an the Alarm screen.
Proximity Alarm — You have entered the alarm radius of a user-defi ned proximity waypoint.
Proximity Memory Full — No additional proximity waypoints can be saved.
Proximity Radius Overlaps — The radius of two proximity waypoints overlap.
104

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents