Top Cover - HP Pavilion dv4 Maintenance And Service Manual

7. Release the zero insertion force (ZIF) connector (1) to which the keyboard cable is attached, and
then disconnect the keyboard cable (2) from the system board.
CAUTION:
8. Release the ZIF connector (3) to which the keyboard backlight cable is attached, and then
disconnect the keyboard backlight cable (4) from the system board.
9. Remove the keyboard.
Reverse this procedure to install the keyboard.

Top cover

NOTE: The top cover spare part kit includes the TouchPad and TouchPad cable.
Description
In espresso black finish
In Pacific blue finish
In ruby red finish
Before removing the top cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
60 Chapter 4 Removal and replacement procedures
Step 8 applies only to computer models equipped with a keyboard with backlight.
Spare part number
650487-001
650490-001
650489-001