Show Platform Stack Compatibility Table - Cisco Catalyst 2960-XR Reference

Stack Manager Commands

show platform stack compatibility table

To display feature compatibility tables for the switch stack, use the show platform stack compatibility table
command in privileged EXEC mode.
show platform stack compatibility table {all| independent| interdependent| port}
Syntax Description
all
independent
interdependent
port
Command Default
None
Command Modes
Privileged EXEC
Command History
Release
Cisco IOS 15.0(2)EX1
Usage Guidelines
The show platform stack compatibility commands display feature incompatibility information between
stack members in a mixed stack. Compatibility checks ensure that features that are supported across members
of a stack using a forwarding ASIC with different capabilities will function effortlessly and error free.
Use this command only when you are working directly with your technical support representative while
troubleshooting a problem. Do not use this command unless your technical support representative asks you
to do so.
Examples This example shows how to display all feature compatibility tables:
Switch# show platform stack compatibility feature all
==============================================================
1: FHRR hardware vlan entry sharing feature
2: Jumbo MTU Routing Support
3: VRF on PVLAN interface
4: Global VRF config with greater than MAX policies
5: Routing keyword in IPv6 ACL
OL-29435-01
System Level Interdependent Feature Matrix
Supported by switch versions: 1 3 4
Supported by switch versions: 1 3 4
Supported by switch versions: 1 3 4
Supported by switch versions: 1 3 4
Catalyst 2960-XR Switch Stack Manager Command Reference, Cisco IOS Release 15.0(2)EX1
Displays all feature compatibility tables.
Displays a switch-level independent feature compatibility table.
Displays a system-level interdependent feature compatibility table.
Displays a port-level independent feature compatibility table.
Modification
This command was introduced.

show platform stack compatibility table

25