Session - Cisco Catalyst 2960-XR Reference

Stack Manager Commands

session

To access a specific stack member use the session command in privileged EXEC mode on the stack master.
session stack-member-number
Syntax Description
stack-member-number
Command Default
None
Command Modes
Privileged EXEC
Command History
Release
Cisco IOS 15.0(2)EX1
Usage Guidelines
When you access the member, its member number is appended to the system prompt.
Use the session command from the master to access a member switch.
Use the session command with processor 1 from the master or a standalone switch to access the internal
controller. A standalone switch is always member 1.
Examples This example shows how to access stack member 3:
Switch# session 3
Switch-3#
Related Commands
Command
reload
show switch
switch
switch renumber
OL-29435-01
Stack member number to access from the stack master. The range is 1 to 8.
Description
Reloads the stack member and applies a configuration change.
Displays information related to the stack member or the switch stack.
Disables or enables the specified stack port on the member.
Changes the stack member number.
Catalyst 2960-XR Switch Stack Manager Command Reference, Cisco IOS Release 15.0(2)EX1
Modification
This command was introduced.

session

21