Editing Command Lines That Wrap - Cisco Catalyst 2960-XR Reference

Enabling and Disabling Editing Features
Ctrl-V or Esc Q
Return key
Space bar
Ctrl-L or Ctrl-R

Editing Command Lines That Wrap

You can use a wraparound feature for commands that extend beyond a single line on the screen. When the
cursor reaches the right margin, the command line shifts ten spaces to the left. You cannot see the first ten
characters of the line, but you can scroll back and check the syntax at the beginning of the command. The
keystroke actions are optional.
To scroll back to the beginning of the command entry, press Ctrl-B or the left arrow key repeatedly. You can
also press Ctrl-A to immediately move to the beginning of the line.
The arrow keys function only on ANSI-compatible terminals such as VT100s.
Note
The following example shows how to wrap a command line that extend beyond a single line on the screen.
SUMMARY STEPS
1. access-list
2. Ctrl-A
3. Return key
DETAILED STEPS
Command or Action
Step 1 access-list
Example:
Switch(config)# access-list 101 permit tcp
Catalyst 2960-XR Switch Stack Manager Command Reference, Cisco IOS Release 15.0(2)EX1
10
Designates a particular keystroke as an executable
command, perhaps as a shortcut.
Scrolls down a line or screen on displays that are
longer than the terminal screen can display.
The More prompt is used for any output that
Note
has more lines than can be displayed on the
terminal screen, including show command
output. You can use the Return and Space
bar keystrokes whenever you see the More
prompt.
Scrolls down one screen.
Redisplays the current command line if the switch
suddenly sends a message to your screen.
Purpose
Displays the global configuration command entry that extends beyond
one line.
When the cursor first reaches the end of the line, the line is shifted ten
spaces to the left and redisplayed. The dollar sign ($) shows that the
Using the Command-Line Interface
OL-29435-01