Replacing The Erm; Updating The Ups Firmware - HP R7000 INTL User Manual

Remove the UPS battery modules.
8.
Remove the screws securing the UPS to the rack.
9.
Remove the UPS from the rack.
10.
To replace the component, reverse the removal procedure.

Replacing the ERM

To remove the ERM:
Disconnect all cabling.
1.
Remove the front bezel
2.
replaced.
Remove the screws securing the ERM to the rack.
3.
Remove the ERM from the rack.
4.
To replace the component, reverse the removal procedure.

Updating the UPS firmware

To update the UPS firmware, see the HP website (http://www.hp.com/go/rackandpower).
("Removing the ERM front bezel" on page 37) on the ERM that is being
Maintenance 43