Other products in the Adder range
The following complementary KVM switch devices are available:
• SmartView 4XPRO 16 port (part code: SV4X16)
• SmartView 2XPRO 8 port (part code: SV2X8)
• SmartView 2XPRO 4 port (part code: SV2X4)
• AdderView Matrix 208 (part code: AVM208)
• AdderView Matrix 216 (part code: AVM216)
Warranty
Adder Technology Ltd warrants that this product shall be free from defects in
workmanship and materials for a period of two years from the date of original
purchase. If the product should fail to operate correctly in normal use during the
warranty period, Adder will replace or repair it free of charge. No liability can be
accepted for damage due to misuse or circumstances outside Adder's control.
Also, Adder will not be responsible for any loss, damage or injury arising directly
or indirectly from the use of this product. Adder's total liability under the terms
of this warranty shall in all circumstances be limited to the replacement value of
this product.
If any difficulty is experienced in the installation or use of this product that you
are unable to resolve, please contact your supplier.
Safety information
• For use in dry, oil free indoor environments only.
• Warning - live parts contained within power adapter.
• No user serviceable parts within power adapter - do not dismantle.
• Plug the power adapter into a socket outlet close to the module that it is
powering.
• Replace the power adapter with a manufacturer approved type only.
• Do not use the power adapter if the power adapter case becomes damaged,
cracked or broken or if you suspect that it is not operating properly.
• If you use a power extension cord with the AdderView Prism, make sure
the total ampere rating of the devices plugged into the extension cord does
not exceed the cord's ampere rating. Also, make sure that the total ampere
rating of all the devices plugged into the wall outlet does not exceed the
wall outlet's ampere rating.
• Do not attempt to service the AdderView Prism yourself.
16
Need help?
Do you have a question about the AdderView Prism and is the answer not in the manual?
Questions and answers