Am/fm marine receiver with bluetooth and fixed face (15 pages)
Summary of Contents for Dual MDM300
Page 1
MDM300 INSTALLATION/OWNER'S MANUAL CD Marine Receiver...
Page 2
MDM300 INSTALLATION Preparation Please read entire manual before installation. Before You Start • Disconnect negative battery terminal. Consult a qualified technician for instructions. • Avoid installing the unit where it would be subject to high temperatures or where it would be subject to dust, dirt or excessive vibration.
MDM300 INSTALLATION Wiring Diagram FUSE When replacing the fuse, make sure new fuse is the correct type and amperage. Using an incorrect fuse could damage the radio. The MDM300 uses one 10 amp AGC fuse located in-line.
NOTE: CD, SD and USB modes will not appear unless a CD, SD Card or USB device is inserted. The MDM300 a 3.5 mm auxiliary input port on the front panel Auxiliary Input of the unit for connecting an audio device, MP3 player, etc.
Page 7
MDM300 OPERATION General Operation - Setup Menu Menu Function Options Action Toggles between the following equalization options: OFF, Equalizer POP, ROCK, CLASS and FLAT). BEEP OFF Disables the confirmation beep. Beep Confirmation BEEP ON Enables the confirmation beep. SEEK 1 Enables seek tuning priority. Seek Priority SEEK 2 Enables manual tuning priority.
Page 8
MDM300 OPERATION General Operation Audio Press AUDIO momentarily to select between Bass, Treble, Balance and Fader. BASS TREBLE BALANCE FADER Bass Press AUDIO until BAS appears then rotate volume knob left/right to adjust ( -7 minimum / +7 maximum). Treble Press AUDIO until TRE appears then rotate volume knob left/right to adjust ( -7 minimum / +7 maximum).
Page 9
MDM300 OPERATION AM/FM Tuner Operation Seek Tuning Press TUNE or TUNE momentarily to seek to the next strong station. Manual Tuning Press and hold TUNE or TUNE until "MANUAL" appears, then press TUNE or TUNE momentarily to change radio frequency up or down one step at a time.
MDM300 OPERATION CD Player Operation Insert CD With the label facing up, insert a standard size CD into the CD slot. The CD will automatically begin playback. Eject CD Press EJECT to eject the CD. The unit will change to previous mode of operation. If the disc is not removed within 10 seconds, the unit will reload the disc.
Page 11
MDM300 OPERATION CD Player Operation - MP3/WMA Files Playing an MP3/WMA CD When an MP3/WMA encoded disc is first inserted, “LOAD" will appear in the display. Depending on the number of files and folders, this may take several seconds. Displaying Information ID3 tag and file/folder information will automatically be displayed during playback. Press BAND to manually select and display the song information.
Page 12
MDM300 OPERATION CD Player Operation - MP3/WMA Files Media Compatibility The following types of discs/files are compatible: • CD-ROM (ISO), CD-R, CD-RW • CD-DA • MP3 data • WMA data The following types of discs/files are not compatible: • WMA files that are protected by DRM (Digital Rights Management).
Page 13
MDM300 OPERATION CD Player Operation - MP3/WMA Files Additional MP3/WMA When playing a disc recorded with regular audio files Information (CD-DA or .WAV) and MP3/WMA files, the unit will play the MP3/WMA files only. Only MP3 files with filename extension (.mp3) can be played. Only WMA files with filename extension (.wma) can be played.
Page 14
MDM300 OPERATION SD Card / USB Operation Connecting a USB Device To play MP3/WMA files from most USB mass storage (sold separately) devices, line up the USB connector and insert the USB device into the USB port. Inserting an SD Card To play MP3/WMA files from an SD Card, insert the card (sold separately)
Page 15
MDM300 OPERATION SD Card / USB Operation Character Support Maximum character display information • Track name – 64 character maximum • Directory name – 64 character maximum • *Song title – 64 character maximum • *Artist name – 64 character maximum • *Album name – 64 character maximum *Song title, artist name and album name will only be displayed if included with the MP3/WMA file.
Page 16
MDM300 OPERATION SD Card / USB Operation Additional MP3/WMA Only MP3 files with filename extension (.mp3) can be played. Information Only WMA files with filename extension (.wma) can be played. Do not attempt to play non-MP3/WMA files with the MP3/WMA extension. Sampling Frequency Rates 8kHz ~ 48kHz 8kHz ~ 48kHz Transfer Bit rates...
Page 17
MDM300 OPERATION Music Search - MP3/WMA Files Time Search Press AMS until "TIME SCH" appears. Turn the volume knob left/right to choose the desired elapsed time in the current song. Press AUDIO to begin playback from the displayed elapsed time. Track Search Press AMS until "TRK SCH" appears. Turn the volume ...
2. If you require service during the the original purchase. warranty period, you must carefully pack the product (preferably in the Dual Electronics Corp. agrees, at our original package) and ship it by prepaid option, during the warranty period, transportation with a copy of the original...
MDM300 OPERATION Troubleshooting Problem Cause Action Yellow wire not connected or incorrect Check connections for proper voltage Red wire not connected or Unit will not turn on voltage (11~16VDC) incorrect voltage (no power) Black wire not connected Check connection to ground Fuse blown Replace fuse Speaker wires not connected Check connections at speakers Unit has power ...
MDM300 OPERATION FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 26
DMP67 INSTALLATION Preparation/Installation Please read entire manual before installation. Before You Start • Disconnect negative battery terminal. Consult a qualified technician for instructions. • Use extreme caution when drilling holes to avoid damaging fuel lines, hydraulic lines or existing wiring. • If additional wiring is required, we recommend that you run all wires prior to mounting your speaker in place.
Page 27
A slight adjustment of any custom Dual Electronics Corp. warrants this product to controls or connections discussed in your the original purchaser to be free from defects in instruction booklet may save you a service material and workmanship for a period of one call.