Convection Cooking - Panasonic NN-CF778S Cookery Book & Operating Instructions

Hide thumbs Also See for NN-CF778S:
Table of Contents

Advertisement

Your Combination Oven can be used as a conventional oven using the CONVECTION mode
which incorporates a heating element with a fan.
For best results always place food in a preheated oven. The grill will come on when the oven is
preheating.
You can cook in three ways when using convection cooking -
1. On the Enamel shelf in the lower or upper shelf position.
2. On the Wire rack shelf in the lower or upper shelf position.
3. Both of the above at the same time, to use the oven for two level cooking.
See individual guidelines on pages 37 for recommended accessories to use.
You can preheat with or without the Enamel shelf or Wire shelf in position.
Turn Auto Menu/ Temperature dial
Press
to select oven temperature. The
Convection
oven starts at 150°C. Rotate the
Pad
dial to the right and the
temperature will count up in 10°C
stages to 250°C.
Rotate the dial to the left to count in
10°C stages to 100°C, then 40°C.
Enter cooking time using Time/
Weight Dial. Maximum
cooking time is 9 hours.
NOTE:
1. Open the door using the Pull Down Door,
because if the Stop/Cancel Pad is pressed
the program may be cancelled.
2. You can add to the cooking time during
cooking, if required. Turn Time/Weight Dial
to increase the cooking time. A maximum
time of 10 minutes can be added.
CAUTIONS:
THE ACCESSORIES AND THE SURROUNDING OVEN WILL GET VERY HOT. USE OVEN
GLOVES.
36

Convection Cooking

The oven will maintain the selected preheated
temperature for approximately 30 minutes. If
no food has been placed inside the oven or a
cooking time set, then it will automatically
cancel the cooking program and revert to time
of day.
Press Start Button to preheat. A "P"
will appear in the display window.
When the oven is preheated the
oven will beep and the "P" will
flash. Then open the door and
place the food inside.* There is no
preheat at 40°C.
Press Start Button. Note: Check
that only the convection
symbol
is still in the
display. If the microwave
symbol is displayed this is incorrect
and the program should be
cancelled. Reselect the convection
setting.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nn-cf768m

Table of Contents