Audio Operation; Tuner Operation - Dual XD250 Owner's Manual

Bass
Treble
Balance
Fader
Preset EQ Curves
Loudness
Seek Tuning
Manual Tuning
FM Stereo/Mono
Band
Storing and Recalling
Station Presets
Press AUDIO until BAS appears
Rotate the volume knob left/right to adjust
(-6 minimum / 6 maximum)
Press AUDIO until TRE appears
Rotate the volume knob left/right to adjust
(-6 minimum / 6 maximum)
Press AUDIO until BAL appears
Rotate the volume knob left/right to adjust
(L12 - R12) "BAL R=L" represents equal balance.
Press AUDIO until FAD appears
Rotate the volume knob left/right to adjust
(F12 - R12) "FAD R=F" represents equal balance.
Press AUDIO until EQ appears. Rotate volume knob left/
right to adjust between POP, CLS, ROC and OFF (default)
equalization curves. Any adjustment to the Bass or Treble
settings automatically cancels the current EQ curve.
Press LOUD to enable/disable the loudness feature, which
enhances the bass and treble frequencies at low volumes.
nn
Press TUNE or TUNE
seek to the next strong station.
nn
Press TUNE or TUNE
radio frequency up or down one step at a time. Press and
hold to advance quickly.
Press BAND for more than 2 seconds to select mono or
stereo (default) reception of the broadcast signal.
Press BAND to select between FM1, FM2, FM3 and AM1,
AM2 bands.
Up to 18 FM stations and 12 AM stations can be stored.
To store a station, select the desired band and station.
Press and hold the desired preset button for more than 2
seconds. When stored, the preset number will appear in the
display. The station can be recalled anytime by pressing the
corresponding preset button.
XD250 OPERATION
Audio Operation
Tuner Operation
ll
for more than 2 seconds to
ll
momentarily to change the
7