Outdoor Transmitter Fell And No Longer Works; Outdoor Transmitter Drains Batteries Quickly; Fahrenheit/Celsius; Min/Max Temperature Readings - La Crosse Technology WS-9009-IT Information

Outdoor transmitter fell and no longer works

 If there is no physical damage to the outdoor transmitter, the fall may not have caused
internal damage.
 An outdoor transmitter that has fallen into a puddle or other standing water or snow may
have water damage.
 Transmitters are water resistant, not waterproof.
 A fall can shock the transmitter or the
 Batteries that have fallen on a hard surface may be damaged and unable to function
properly.
 Complete a
Restart
 Use
Batteries dated at least six years in advance of the current year. Batteries dated earlier
than six years from now may still work, but may be unstable in performance.

Outdoor Transmitter Drains Batteries Quickly

 Test a new set of alkaline batteries. Write down the date of installation and the voltage of the
batteries.
 When the batteries fail, please note the date and voltage again. This is helpful in
determining the problem.
 Check the
distance
Transmitters at the end of the range may work while batteries are fresh but not after they
drain a bit.
 Check for leaking batteries, which may damage the transmitter.
 Battery life is over 24 months when using reputable battery brands for both Alkaline and
Lithium batteries.

Fahrenheit/Celsius

 This temperature station reads in Fahrenheit only.

MIN/MAX Temperature Readings

This temperature station will show the minimum and maximum temperatures from setup until
you reset the min/max temperatures or remove the batteries from the temperature station. If you
wish a 24-hour min/max reading, reset the min/max temperatures at the same time each day.
View Minimum and Maximum Records: When you are in Indoor temperature mode, you will
view or reset the Indoor min/max temperatures. When you are in Outdoor mode, you will view
the Outdoor min/max records.
Press the IN/OUT key to view the current Indoor/Outdoor temperature
Press the MIN/MAX key to view the MIN record
Press again the MIN/MAX key to view the MAX record.
Press the MIN/MAX once more to return to current Indoor/Outdoor temperature.
Reset the Minimum and Maximum Records: To reset the indoor or outdoor MIN and MAX
temperatures press and hold the MIN/MAX button for 5 seconds while in the Indoor or Outdoor
mode. Temperature will then reset to the current values.
La Crosse Technology, Ltd.
batteries
with fresh batteries.
and resistance between the transmitter and temperature station.
in the transmitter.
Page 4