Table of Contents
Advertisement
The time will be updated automatically with the time from the Internet when the
display is synchronized with the gateway. The time can be set manually by
following the steps below.
1. The hour digit will flash.
2. Press the ▲/DATE button or ▼/RAIN button to set the hour.
3. Press the SET button to switch to the minutes. The minute digit will
flash.
4. Press the ▲/DATE button or ▼/RAIN button to set the minute.
5. Press the SET button to confirm and to enter the 12/24-HOUR TIME
DISPLAY.
12/24 HOUR TIME DISPLAY
The time can be set as 12-hour or 24-hour format. To change the time display:
1. The "12h" or "24h" digits will flash.
2. Press the ▲/DATE button or ▼/RAIN button to toggle the value.
3. Press the SET button to confirm and to enter the DATE SET.
DATE SET
The default date is 1.1. of the year 2013. The date will be updated automatically with the date from the
Internet when the display is synchronized with the gateway. The date can also be set manually by
following the steps below.
1. The year digit will flash. Press the ▲/DATE button or ▼/RAIN button to
set the year. The range runs from "00" (2000) to "99" (2099).
2. Press the SET button to confirm the year and enter the month setting.
The month digit will flash.
3. Press the ▲/DATE button or ▼/RAIN button to set the month.
4. Press the SET button to confirm the month and enter the date setting
mode. The date digit will flash.
5. Press the ▲/DATE button or ▼/RAIN button to set the date.
6. Press the SET button to confirm and to enter the °F/°C TEMPERATURE
UNIT.
°F/°C TEMPERATURE UNIT
The temperature can be displayed in °F or °C (Default °F).
1. The temperature unit will flash.
2. Press the ▲/DATE button or ▼/RAIN button to toggle between "°F" or
"°C".
3. Press the SET button to confirm and to enter the WIND SPEED UNIT.
W IND SPEED UNIT
The wind speed unit can be set to read in mph (miles per hour), km/h (kilometers
per hour), bft (Beaufort), knots or m/s (meters per second). The default unit is
mph.
RAINFALL UNIT
1. Press the ▲/DATE button or ▼/RAIN button to toggle between the unit
"mph", "km/h", "bft", "knots" or "m/s"
2. Press the SET button to confirm and to enter the RAINFALL UNIT.
P a g e
| 11
Hide quick links:
Advertisement
Table of Contents
