12/24 Hour Time Display Setting; Calendar Setting - La Crosse Technology WS-2801-IT Instruction Manual

4. Press the ▲UP ARROW key or ▼DOWN ARROW key to set the minute.
Continually holding the key will increase the digit faster.
5. Press the SET key to confirm and to enter the 12/24 HOUR TIME DISPLAY
SETTING.

12/24 HOUR TIME DISPLAY SETTING

The time can be set to view as 12-hour or 24-hour format. The default time-display
mode is 24-h. To set to 12-h time display:

CALENDAR SETTING

The default date is 1. 1. of year 2009. The date will be updated automatically with the
date from the computer when the display is synchronized with the USB transceiver and
connected to the Heavy Weather Pro software. The date can also be set manually by
following the steps below.
date setting mode. The day digit will start flashing.
6. Press the ▲UP ARROW key or ▼DOWN ARROW key to set the day. Hold the
key in to change the value faster.
7. Press the SET key to confirm and to enter the °F/°C TEMPERATURE UNIT
SETTING.
1. The 24h or 12h digit is flashing
2. Press the ▲UP ARROW key or ▼DOWN ARROW
key to toggle the value.
3. Press the SET key to confirm and to enter the
CALENDAR SETTING.
Note:
• 24h time display format will show: Day/ Month/ Year
• 12h time display format will show: Month/ Day/ Year
1. The year digit starts flashing.
2. Press the ▲UP ARROW key or ▼DOWN ARROW
key to set the year. The range runs from "00" (2000) to
"99" (2099). Hold the key in to change the value faster.
3. Press the SET key to confirm the year and enter the
month setting. The month digit will start flashing.
4. Press the ▲UP ARROW key or ▼DOWN ARROW
key to set the month. Hold the key in to change the
value faster.
5. Press the SET key to confirm the month and enter the
44