Copying And Clearing Routes - Garmin GPSCOM 170 Owner's Manual

Reference
Route
Navigation
Enter each waypoint in the
order you would like to
navigate them. If you enter
a waypoint not stored in
memory, you'll need to
define the position on the
waypoint definition page.
To copy a route, select an
open storage route and
press the ENTER key. If you
select a route that is already
used, you'll be alerted with
a 'Route Full' message.
44
To create a route from the route definition page:
1. Highlight the route number field and press
2. Enter a route number and press
E
3. Press to begin entry of a route comment. (Note
that the default [first and last waypoint] comment will
only appear if the comment field is blank.)
4. Enter your comment and press
5. Highlight the No. 1 waypoint field and press
6. Enter the first waypoint of your route and press
7. Continue entering the rest of your waypoints in order,
E
using the
entry. The list will automatically scroll down as
needed.
8. After you have entered all your waypoints, press
P
.

Copying and Clearing Routes

The route definition page is also used to copy a route
to another route number. This feature is useful when you
make changes to the active (or TracBack) route and want
to save the route for future use.
To copy a route:
1. Highlight the route number field and press
2. Enter the route number to be copied and press
3. Highlight the 'COPY TO' field and press
4. Scroll through the available routes and select a desti-
nation route number. Only open routes will be available
as choices. Press
P
5. Press to return to the menu page.
To clear a route from memory:
1. Highlight the route number field and press
2. Enter the route number and press
3. Select the 'CLR?' prompt and press
E
E
.
key to start and confirm each field
E
to copy the route.
E
E
E
.
to confirm.
E
.
E
.
E
.
E
.
E
.
E
.
.
.