Carrier Transport Motor Removal - Lexmark 7200 Color Jetprinter Service Manual

4092
Note: During reassembly:
1. Be sure the small feed roll spring extensions [B] are in the
grooves of the small feed roll arms.
2. Be sure the short extensions of the two paper flap springs are
trapped under the carrier frame [C].
3. Be sure the tab from the paper guide does not deflect the small
feedroll shaft downward. The shaft should be forward of the tab.

Carrier Transport Motor Removal

1. Remove the front cover.
2. Disconnect the transport motor connector from the system
board.
3. Remove the belt from the transport motor pulley.
4. Remove the two screws securing the transport motor to the
carrier frame and remove the motor. Note the routing of the
motor cable.
4-5