Garmin GPS 50 Owner's Manual page 47

· With the cursor under the storage select field, press MORE until the
desired route is displayed (e.g., Route 5 as illustrated below).
This route will be the default storage selection for subsequent
AutoStore
· With the desired route selected, press ENT. The AutoStore
will be stored in the waypoint memory and appended to the selected
route.
When you are ready to return, use the Route Catalog Page to activate the
route you created in reverse order. The GPS 50 will automatically guide you
back to your destination by passing over the waypoints you created! As an
added benefit, you now have a route that will take you back to your fishing
spot at any time.
6-8
TM operations until it is changed or the route becomes full.
TM waypoint