Garmin GPS 50 Owner's Manual page 37

· Press ENT. The timer will start counting down. When the timer
reaches zero, you will be informed with the message " TIMER EXP"
and the timer will begin to count up showing you the elapsed time since
the timer has expired.
To stop the count down timer...
· With the cursor under the selection field, press MORE until " STOP?"
is displayed.
· Press ENT. The count down timer will freeze at its last value.
The elapsed timer counts up instead of counting down. It does not generate
a message, but simply measures time from the point at which it was started.
To start the elapsed timer...
· With the cursor under the time field, enter the start time in hours,
minutes, and seconds (you may start or restart the elapsed timer from
a non-zero time).
· With the cursor under the selection field, press MORE until " COUNT
UP?" is displayed.
· Press ENT. The timer will start counting up.
To stop the elapsed timer...
· With the cursor under the selection field, press MORE until " STOP?"
is displayed.
· Press ENT. The elapsed timer will freeze at its last value.
5-3