Garmin GPS 50 Owner's Manual page 25

The GPS 50 is ready to accept your commands!
Select the simulator mode...
· Press SET until the Set Menu is displayed.
· Press MORE until " OP MODE?" is
displayed.
· Press ENT to display the Operating Mode
Page.
· Press MORE until " SIMULATR?" is
displayed, then press the ENT key. You
have just selected simulator mode.
Set the simulation speed...
· With the cursor under the ground speed
field, press 0, 1, 5, followed by the ENT
key, to indicate 15 knots (you may enter
any speed you wish up to 90 knots). The
simulation speed is now set.
GOTO GARMIN...
· Press GOTO. The Active Route Page will
be displayed with the cursor under the
GOTO waypoint name.
3-10