Cleaning; Silver Ion Filter; Electrostatic Filter; Cleaning The Cabinet - DeLonghi AIR CONDITIONER Instructions Manual

Certain models have a silver ion dust filter and
an additional electrostatic filter in the grill at the
back

Silver ion filter

This dust filter is treated with silver ions which
not just retain dust particles, but also have an
efficient antibacterial action. It also greatly redu-
ces concentrations of irritants such as pollen and
spores.

Electrostatic filter

The electrostatic filter retains the finest dust par-
ticles, thus enhancing the filtering capacity of the
appliance.
Fitting the filters to the grille
The appliance can be used with just the dust fil-
ters already inserted in the grille.
To use the two supplementary filters (if provided
with your model), remove them from the packa-
ging and attach them to the dust filter, inserting
them under the special clips (fig. 40).
If you decide not to use it, keep it sealed in the
packaging.
40
Silver ion
filter
Electrostatic filter

CLEANING

Before cleaning or maintenance, turn the applian-
ce off by pressing the button on the control
panel or remote control, wait for a few seconds
then unplug from the mains socket.

Cleaning the cabinet

You should clean the appliance with a slightly
damp cloth then dry with a dry cloth.
• Do not wash the air conditioner with water. It
could be dangerous.
• Do not use petrol, alcohol or solvents to cle-
an the appliance.
Do not spray insecticide liquids or similar.
Cleaning the air filters
To keep your air conditioner working efficiently,
you should clean the dust filters every week of
operation.
Cleaning the dust filters supplied with all
models
Each filter is housed in the intake grille.
To clean the filters, proceed as follows
• Remove the intake grille by pulling it ou-
twards (fig. 38).
• Remove the dust filter by detaching it from
the grille (Fig. 39).
• Use a vacuum cleaner to remove the dust
collected on the filter.
If it is very dirty, immerse in warm water and
rinse a number of times.
• After washing, leave the filter to dry comple-
tely.
• To replace, put the filters back in the intake
grille then attach the intake grille to the ap-
pliance.
18