Setting The Sleep Timer; Other Connections; Connecting Optional Equipment - Aiwa NSX-H90 Operating Instructions Manual

SETTING THE SLEEP TIMER

The unit can be turned off automatically at a specified time.
Use the remote control.
1 Press the SLEEP button.
2 Within 4 seconds, press the f or g button
to specify the time until the power is turned off.
Each time the button is pressed, the time changes between 5
and 240 minutes in 5-minute steps.
Specified time
To check the time remaining until the power is turned off
Press the SLEEP button once. The remaining time is displayed
for 4 seconds.
To cancel the sleep timer
Press the SLEEP button twice so that "SLEEP" on the display
disappears.

OTHER CONNECTIONS

CONNECTING OPTIONAL
EQUIPMENT
Refer to the operating instructions of the connected equipment
for details.
• The connecting cords are not supplied. Obtain the necessary
connecting cords.
• Consult your local Aiwa dealer for optional equipment.
TV OR VIDEO EQUIPMENT
Two video units and a TV set for monitoring can be connected to
this unit.
Use cables with RCA phono plugs.
Connecting a TV set
Connect to the MONITOR OUT terminal.
You can watch the video playback of either of the connected
video units on the TV. Press the VIDEO 1/MD or VIDEO 2/AUX
button to select one of the units.
Connecting the video equipment
Connect to the VIDEO 1/MD IN or VIDEO 2/AUX IN terminals.
• Audio signals of the equipment connected to the VIDEO 1/MD
IN are not output through the REC OUT terminal.
• We recommend that the TV set be placed to the right of the
system.
POWERED SUB WOOFER
Connect an optional powered sub woofer with a built-in amplifier
to the SUPER WOOFER terminal.
En
22
ENGLISH