Garmin GNC 300 Pilot's Manual page 22

REFERENCE
SECTION
NAV KEY
1
Waypoint
CDI &
NAVCOM Pages
Communication
The NAVCOM page lists the frequencies for your
departure (or nearest) and destination airports in
the following order:
Departure
• ATIS
• Clearance Delivery
• Clearance Pretaxi
• Ground
• Tower
• Other
• Multicom
• Unicom
• Departure
• Class B
• TMA
• CTA
• Class C
• TRSA
12
Arrival
• ATIS
munications (NAVCOM) page. The NAVCOM page provides a list of the airport
• Approach
frequencies at your departure and arrival airports, allowing convenient selection of
• Arrival
every frequency you'll need along your flight path. To scroll through the list of fre-
• Class B
• TMA
quencies, rotate the inner knob (K) in the direction of the arrow prompts at the
• CTA
bottom left of the page.
• Class C
• TRSA
• Tower
• Other
order you are most likely to use them (see left), with the available frequencies dis-
• Multicom
played to the right of the airport identifier. If you do not have an active direct-to or
• Ground
route, the NAVCOM page will display the frequencies for the airport nearest your
• Unicom
present position.
To change any of the selectable fields on the CDI page:
C
1. Press twice to activate the cursor in the GPS window.
O
2. Rotate to highlight the field you would like to change.
K
3. Rotate to change the field to display the desired information.
O
4. Rotate to highlight another field, or
The next page available from the GNC 300' s NAV key is the navigation com-
The frequencies displayed for the departure and arrival airports are listed in the
C
to finish.