INTELLIGENT EYE Operation
To adjust the angle of the INTELLIGENT EYE sensor
• You can adjust the angle of the INTELLIGENT EYE
sensor to increase the detection area.
(Adjustable angle: 15° to right and left of centre)
• Gently push and slide the sensor to adjust the angle.
•
After adjusting the angle, wipe the sensor gently with
a clean cloth, being careful not to scratch the sensor.
"INTELLIGENT EYE" is useful for Energy Saving
Energy saving operation
•
Change the temperature –3.6°F (–2°C) in HEAT / +3.6°F (+2°C) in COOL / +1.8°F (+1°C) in dry mode from set temperature.
•
Decrease the airfl ow rate slightly in FAN mode only.
•
If no presence detected in the room for 20 minutes.
NOTE
Notes on "INTELLIGENT EYE"
•
Application range is as follows.
Vertical angle 80°
(Side View)
80°
•
Sensor may not detect moving objects further than 16ft (5m) away. (Check the application range)
•
Sensor detection sensitivity changes according to indoor unit location, the speed of passersby, temperature range, etc.
•
The sensor also mistakenly detects pets, sunlight, fl uttering curtains and light refl ected off of mirrors as passersby.
•
INTELLIGENT EYE operatipon will not go on during powerful operation.
•
NIGHT SET MODE
Page 19
CAUTION
•
Do not place large objects near the sensor.
Also keep heating units or humidifi ers outside the sensor's detection area. This sensor can detect undesirable objects.
•
Do not hit or violently push the INTELLIGENT EYE sensor. This can lead to damage and malfunction.
14
Horizontal angle 100°
(Top View)
50° 50°
will not go on during use of INTELLIGENT EYE operation.
15°
Moving the sensor to the left
Moving the sensor to the right
INTELLIGENT EYE
15°
sensor