HOME LEAVE Operation
HOME LEAVE operation is a function which allows you to
record your preferred temperature and air flow rate settings.
I To start HOME LEAVE
operation
1. Press "HOME LEAVE button" .
• "
" is displayed on the LCD.
• The HOME LEAVE lamp lights up.
ON
OFF
I To cancel HOME LEAVE
operation
2. Press "HOME LEAVE button" again.
• "
" disappears from the LCD.
• The HOME LEAVE lamp goes off.
Before using HOME LEAVE operation.
I I I I To set the temperature and air flow rate for HOME LEAVE operation
When using HOME LEAVE operation for the first time, please set the temperature and air flow rate
for HOME LEAVE operation. Record your preferred temperature and air flow rate.
Cooling
Heating
1. Press "HOME LEAVE button". Make sure "
ler display.
2. Adjust the set temperature with "
3. Adjust the air flow rate with "FAN" setting button as you like.
Home leave operation will run with these settings the next time you use the unit. To change
the recorded information, repeat steps 1 – 3.
16
Initial setting
temperature
Air flow rate
25°C
AUTO
25°C
AUTO
HOME LEAVE
POWERFUL
MODE
SILENT
ON
OFF
Selectable range
temperature
18-32°C
10-30°C
"is displayed in the remote control-
" or "
" as you like.
C
ON/OFF
TEMP
FAN
SWING
SENSOR
CANCEL
TIMER
Air flow rate
5 step, AUTO and SILENT
5 step, AUTO and SILENT
1, 2