Econo Operation - Daikin FVXS60HVMA Operation Manual

ECONO Operation

NOTE
•
ECONO Operation can only be set when the unit is running. Pressing the operation stop button causes the settings to be canceled, and the
"
" disappears from the LCD.
•
ECONO operation is a function which enables effi cient operation by limiting the power consumption of the outdoor unit (operating frequency).
•
ECONO operation functions in AUTO, COOL, DRY, and HEAT modes.
•
POWERFUL and ECONO operation cannot be used at the same time.
Priority is given to the function of whichever button is pressed last.
•
Power consumption may not drop even if ECONO operation is used of the level of power consumption is already low.
16
ECONO operation is a function which enables effi cient operation by limiting the
maximum power consumption value.
This function is useful for cases in which attention should be paid to ensure a
circuit breaker will not trip when the product runs alongside other appliances.
To start ECONO operation
Press
" • " is displayed on the LCD.
To cancel ECONO operation
Press
" • " disappears from the LCD.
Running current and
power consumption
ECONO
Mode
• This diagram is a representation for illustrative purposes only.
* The maximum running current and power consumption of the air conditioner in ECONO
mode vary with the connecting outdoor unit.
during operation
again.
Maximum during
normal operation
Normal
operation
Maximum during
ECONO Mode
From start up until set
temperature is reached
.
Time