Halt On; Date And Time - IBM Types 2193 User Manual

Typematic Delay (Msec)
When the typematic rate is enabled, you can select the delay between when the key
was first depressed and when the acceleration begins.
250
500
750
1000

Halt On

Use this setting to determine under what conditions the power-on self test (POST)
will halt when errors are detected.
ALL errors
No errors
ALL, But keyboard
ALL, But diskette
ALL, But disk/key

Date and Time

Use this setting to set the date and time.
250 msec
500 msec
750 msec
1000 msec
System halts in case of any errors
System won't halt in case of any errors
System halts except for the keyboard error
System halts except for the diskette error
System halts except for the diskette or keyboard
error
BIOS Setup configuration
6-15