Advertisement
Available languages
Available languages
LP Tank Exchange
Connecting Regulator
To The LP Tank
• Many retailers that sell grills offer you the option of replacing
your empty LPtank through an exchange service Use only those
reputable exchange companies that inspect, precision fill, test
and certify their cylinders Exchange your tank only for an OPD
safety feature-equipped tank as described inthe "LP Tank"
section of this manual
• Always keep new and exchanged LPtanks in upright position
during use, transit or storage
• Leaktest new and exchanged LPtanks BEFORE connecting to
grill
1 LPtank must be properly secured onto grill (Referto
assembly section.)
2 Turn all control knobs to the OFF position
3 Turn LPtank OFF by turning OPD hand wheel clockwise to a
full stop
4 Removethe protective cap from LPtank valve Always use
cap and strap supplied with valve
LP Tank Leak Test
For your safety
• Leaktest must be repeated each time LPtank is exchanged or
refilled
• Do not smoke during leak test
• Do not use an open flame to check for gas leaks
• Grill mustbe leak tested outdoors in a wellventilated
area,
away from ignition sources such as gas fired or electrical
appliances During leak test, keep grill away from open flames
or sparks
• Usea clean paintbrush and a 50/50 mild soap and water
solution Brushsoapy solution onto areas indicated by arrows
infigure below Leaksare indicated by growing bubbles
Safety Relief
Strap and Cap
_PD Hand Wheel
_e 1 outlet with
thread on outside
Do not insert a POL transport plug
(plastic part with external
threads) into the type 1 valve
outlet. It will defeat the Safety
Relief Valve feature.
• Do not use household cleaning agents Damage to the gas
train components (valve/hose/regulator) can result
5 Hold regulator and insert nipple into LP
tank valve Hand tighten the coupling
nut, holding regulator in a straight line
with LPtank valve so as not to crossth
thread the connection
Nipple
has to be
centered
into the LP
tank v a Ilii\_'_.
6 ° 29163-30800317
Advertisement
