Advanced Setup - ZyXEL Communications P-660N-T1A User Manual

Table 17 Network > WAN > More Connections: Edit (continued)
LABEL
Max Idle Timeout
NAT
Back
Apply
Cancel

Advanced Setup

6.3.2 Advanced Setup
Use this screen to edit your ZyXEL Device's advanced WAN settings. Click the
Advanced Setup button in the More Connections Edit screen. The screen
appears as shown.
Figure 34 Network > WAN > More Connections: Edit: Advanced Setup
P-660N-T1A User's Guide
DESCRIPTION
Specify an idle time-out in the Max Idle Timeout field when you
select Connect on Demand. The default setting is 0, which
means the Internet session will not timeout.
SUA only is available only when you select Routing in the Mode
field.
Select SUA Only if you have one public IP address and want to
use NAT. Click Edit Detail to go to the Port Forwarding screen
to edit a server mapping set.
Otherwise, select None to disable NAT.
Click this to return to the previous screen without saving.
Click this to save your changes.
Click this to restore your previously saved settings.
Click this to display the More Connections Advanced Setup
screen and edit more details of your WAN setup.
Chapter 6 WAN Setup
77