Advertisement
Available languages
Available languages
2. Connect house black to hood black wire, house white
to hood white wire, and house ground under Green
Ground
Screw.
Securely tighten cable clamp onto
house wiring.
GREEN
GROUND
SCREW
:S
t_
1. Hang hood from (4) Mounting
Screws.
Slide hood
towards walI until mounting screws are engaged
in
narrow end of (4) Keyholes.
Tighten mounting screws
securely. A long screwdriver works best.
2. Replace bottom cover.
3. Connect ductwork to hood. Use Duct _
to make
joints secure and air tight.
KEYHOLE (4)
(b
MOUNTING SCREW (4)
:S
DUCT
_"
TAPE
4. Install (2) PAR20, 50 W Maximum Halo eg#A Bumbs or
(2) R16, 40 W Maximum
incandescent
Bulbs.
Purchase bulbs separately.
1
See page 4 for Bulb information,
|
BumbsavaimaMe by calming Sears at 1-800o4_MY-HOME{_)
J
CAUTION:
Bulbs may be hot! Refer to bulb
packaging
for further
information.
5. Replace filters, turn on power at service panel, and test
for proper operation.
PAR20,
50W MAX.
HALOGEN
BULB (2)
or_
R16,
40W MAX.
iNCANDESCENT
BULB (2)
t_
q_
{b
_b
11
Advertisement
