Advertisement
Available languages
Available languages
2.
Remove 7" Round Duct PBate from top of hood. Set duct
plate aside - with mounting screws.
Remove tape holding FHters in place. Pull down on filter
tabs and lift filters out. Set filters aside.
FILTERS
7"ROUND
DUCTPLATE
t_
3. Remove Teflone_-coated bottom cover
from hood. Set
cover and mounting screws aside.
TEFLON_-
BOTTOM
COVER
(Held in
place with
2 screws)
Cb
4. Remove Damper/Duct
Connector
from inside the hood,
Set connector aside - with mounting screws and parts
bag.
DAMPER/
DUCT
CONNECTOR
t_
_b
{b
_b
Teflon e_ is a registered trademark of DuPonL
7
Advertisement
